In comments section at YouTube channel, I receive a repeated question about what tools I use for making videos, and from where I get my tools. In this blog I want to list all tools I use with simple description.
I have 3 cameras, Canon 80D, Canon 70D, and my phone Camera.
This is my main Camera, you can buy it from here. This camera has DIGIC 6 Image Processor, 24MP APS-C CMOS sensor with Dual Pixel AF 45-point AF system with all cross-type points, 3" 1.04M-dot articulating touchscreen, 1080/60p video capture, Weather-resistant body, 7560-pixel RGB+IR Metering Sensor, and a lot of other features.
regarding image and video quality you can see it in my videos. keep in mind that lights has a lot of effect on image quality.
currently I do not use it because its not working :( . This camera has DIGIC 5+ image processor, 20.2MP APS-C 'Dual Pixel CMOS AF' sensor, 19-point AF system, all points cross-type, sensitive to -0.5 EV Fully-articulated touchscreen, 1040k dot 3" ClearView II LCD, 3:2 aspect ratio, 1080p30 video recording, stereo sound via external mic, and many other features. you can buy it here, note that I do not recommend buying this camera unless you don't have enough money to buy newer models.
Smart phone camera
Yes nowadays smart phones cameras are very good, and you can get very good quality videos using your smart phone. so yes I use it sometimes to makes videos for YouTube, share images on Instagram.
I use old Huawei P9, its has 12 MP, f/2.2, 27mm (wide), 1/2.9", 1.25µm, PDAF, Laser AF 12 MP B/W, f/2.2, 27mm (wide), 1/2.9", 1.25µm, Leica optics, dual-LED dual-tone flash, panorama, HDR.
Mainly I use two lenses, Canon EF 50mm f/1.8, and Canon EF-S 24mm f/2.8 STM Lens
Canon EF 50mm f/1.8
This is a great starting lense. you can get very good quality images and videos. I use the old version of this lense, I don't think Canon still make it. If you are going to buy this lense I recommend buying Canon EF 50mm f/1.8 STM Lens. The 'STM' stands for Stepper Motor these lenses are almost silent, so when you record videos the sound does not have the noise of focusing motor.
Canon EF-S 24mm f/2.8 STM Lens
I use this lense because it has wide angle, so you can use it to record yourself while carrying the camera with your hand stretched or you can put the camera close to you.
I do not use expensive microphones, I use BOYA BY-M1 3.5mm and Sony ECMCS3
its an Wired Lavalier microphone that can be used with DSLRs, phones, computers. its a cheap microphone but it has very good quality sound recordings. note that it needs LR44 battery. you can find the mic at Amazon or AliExpress.
Sony ECMCS3 Tie Clip
this is a very small microphone, I use it in many of my videos, it has very good quality recordings. you do not need a battery or any power source, just plug it in your DSLR and start recording. you can buy it from Amazon.
Tripods, Lights, Lights stands
I use two lights, two stands, two tripods.
QZSD Beike Q999 Tripod
This is my main tripod, very good quality tripod with ball head, you can easily detach one of its legs and use it as Monopod. it can carry heavy equipments easily. its reliable and steady it fell zero times till now. it can extend up to 159cm, min height 44cm, you can buy it from AliExpress or Amazon.
ZOMEI Q111 - small and cheap
I always use this small cheap tripod to put the camera on my desk, its really small and you can easily put it on your table. but its not good for places with a lot of movement. it might fall if you bumped into it while moving around. it has these specifications: Model: Q111, Material: Aluminum alloy , Head type: Panhead , Tripod max height: 145cm / 4.92ft, Max. tube diameter: 20mm / 0.8in, Column quantity: 4 sections, Load capacity: 5kg / 11.02Lb. you can buy its from Amazon or AliExpress.
Cheap light stands
Lights are one of the most important equipments to get high quality videos and images. so do not hesitate to invest good amount of money in lighting. I use two YONGNUO YN600 Air led panels. great light quality looking at the cost of these panels. you can buy them from AliExpress or Amazon.
Computers, Screens, And Software
I use an HP z2 workstation to do all my work, and two very old screens
HP Z2 Workstation
a really great machine for entry to mid level 2d/3d design it cost me about $2500. The machine has Intel Xeon E-2278G CPU @ 3.4GHz, 32 GB of RAM, 512 GB M.2 2280 PCIe NVMe TLC SSD, NVIDIA GeForce RTX 2060 super. if you are going to work on 3d projects I recommend buying a GeForce RTX card, you can find them on RTX Cards.
I use two screens one of them is 11 years old Full HD (1920x1080) LG TV 32 inches. the other one is 21 inch full HD monitor from a brand called "FUJICOM", its an old monitor.
What software I use?
I use Adobe Premiere for all my video editing, Adobe Photoshop for all 2d graphic design and photo editing, Adobe Illustrator for all vector graphics, Adobe After effects for all motion elements, and I use OBS for all screen recording, its an open source free amazing and powerful software.
For 3d design I use Blender, great and powerful free open source software. I highly recommend Blender for all your 3d work, its full of features, its a real competitor in 3d world.